.

HDPE PIPE FOR WATER SUPPLY

FOR SAFE WATER

IMG_3445-300x85

 

DESCRIPTION

Semi-rigid pipes in PE80 polyethylene (MRS 8 MPa) and PE100 (MRS 10 MPa), black with a specific location by blue stripes. They come in 50 or 100m crown in straight bars 5.8 – 6.0 – 11.80 & 12,00m. For other lengths, please contact us.

ADVANTAGES

  • •Maximum hydraulic capacity by its smooth wall
  • Corrosion resistance and abrasion
  • Chemical and electrolytic inertia
  • Sealing Network
  • Insensitive to landslides
  • Insensitive to landslides
  • High mechanical strength
  • Resistance to hammering
  • Limited number of connections thanks to its flexibility
  • Alimentarity (ACS Attestation)
APPLICATIONS
  • Underground networks of drinking water conveyance
  • Supply connections
  • Irrigation Project (BLACKS PIPES WITHOUT BLUE BAND).
ASSEMBLY

The PEHD tube “BLUE” can be assembled and connected in three different ways:

  • by compression fittings (PP)
  • by butt welding
  • by electrofusion couplers
RANGE
DN(1)  (mm) Wall Thickness (mm)
HN(2)  SDR21 SDR26 SDR17 SDR21 SDR13.6 SDR17 SDR11 SDR13.6 SDR9 SDR11 SDR7.4 SDR9 SDR6 SDR7.4
PN6 PN8 PN10 PN12.5 PN16 PN20 PN25
PE80 PE100 PE80 PE100 PE80 PE100 PE80 PE100 PE80 PE100 PE80 PE100 PE80 PE100 PE80 PE100
20 1.4 –  –   – –  2.0  – 2.3 2.0 3.0 2.3 3.4 3.0
25 1.5 –  –  2.0 –  2.3 2.0 3.0 2.3 3.5 3.0 4.2 3.5
32 –  –  –  2.0 2.4 2.0 3.0 2.4 3.6 3.0 4.4 3.6 5.4 4.4
40 –  –  2.0 –  2.4 2.0 3.0 2.4 3.7 3.0 4.5 3.7 5.5 4.5 6.7 5.5
50 –  –  2.4 2.0 3.0 2.4 3.7 3.0 4.6 3.7 5.6 4.6 6.9 5.6 8.3 6.9
63 –  –  3.0 2.5 3.8 3.0 4.7 3.8 5.8 4.7 7.1 5.8 8.6 7.1 10.5 8.6
75 –  –  3.6 2.9 4.5 3.6 5.6 4.5 6.8 5.6 8.4 6.8 10.3 8.4 12.5 10.3
90 –  –  4.3 3.5 5.4 4.3 6.7 5.4 8.2 6.7 10.1 8.2 12.3 10.1 15.0 12.3
110 –  –  5.3 4.2 6.6 5.3 8.1 6.6 10 8.1 12.3 10 15.1 12.3 18.3 15.1
125 –  –  6.0 4.8 7.4 6.0 9.2 7.4 11.4 9.2 14 11.4 17.1 14.0 20.8 17.1
140 –  –  6.7 5.4 8.3 6.7 10.3 8.3 12.7 10.3 15.7 12.7 19.2 15.7 23.3 19.2
160 –  –  7.7 6.2 9.5 7.7 11.8 9.5 14.6 11.8 17.9 14.6 21.9 17.9 26.6 21.9
180 –  –  8.6 6.9 10.7 8.6 13.3 10.7 16.4 13.3 20.1 16.4 24.6 20.1 29.9 24.6
200 –  –  9.6 7.7 11.9 9.6 14.7 11.9 18.2 14.7 22.4 18.2 27.4 22.4 33.2 27.4
225 –  –  10.8 8.6 13.4 10.8 16.6 13.4 20.5 16.6 25.2 20.5 30.8 25.2 37.4 30.8
250 –  –  11.9 9.6 14.8 11.9 18.4 14.8 22.7 18.4 27.9 22.7 34.2 27.9 41.5 34.2
280 –  –  13.4 10.7 16.6 13.4 20.6 16.6 25.4 20.6 31.3 25.4 38.3 31.3 46.5 38.3
315 –  –  15.0 12.1 18.7 15.0 23.2 18.7 28.6 23.2 35.2 28.6 43.1 35.2 52.3 43.1
355 –  –  16.9 13.6 21.1 16.9 26.1 21.1 32.2 26.1 39.7 32.2 48.5 39.7 59.0 48.5
400 19.1 15.3 23.7 19.1 29.4 23.7 36.3 29.4 44.7 36.3 54.7 44.7 54.7
450 21.5 17.2 26.7 21.5 33.1 26.7 40.9 33.1 50.3 40.9 61.5 50.3 61.5
500 23.9 19.1 29.7 23.9 36.8 29.7 45.4 36.8 55.8 45.4  – 55.8 –  – 
560 26.7 21.4 33.2 26.7 41.2 33.2 50.8 41.2 62.5 50.8 –  62.5 –  – 
630 30.0 24.1 37.4 30.0 46.3 37.4 57.2 46.3 70.3 57.2 –  70.3 –  – 
710 33.9 27.2 42.1 33.9 52.2 42.1 64.5 52.2 79.3 64.5 –  79.3 –  – 
800 38.1 30.6 47.4 38.1 58.8 47.4 72.6 58.8 89.3 72.6 –  89.3 –  – 

(1)Nominal diameter 

(2)Out of Norms the PN values ​​are based on C = 1.25

Applicable standards: NFT 54-063, NF EN 12201-2 + A1: 2013, ISO 4427-2: 2007

 

CHARATERISTICS
FEATURES      Unit SPECIFICATIONS
PE80 PE100
Density Kg/m3 ≥ 925 ±5Kg/m3 ≥ 954 ±5Kg/m3
melt Mass flow Rate    g/10min 0.25 ± 0.2%: Maximum difference after treatment (load: 5.0 Kg / T °: 190 ° C / Time: 10 min)
carbon black content % ≥ 2,0
longitudinal reversion % ≤ 3 – The tube should retain its original appearance (T ° test = 100 ° C)
hydrostatic strength at 20 ° C (minimum resistance = 1 hour) MPa         10,0        12,0
hydrostatic strength at 80 ° C  held = 165h MPa 4,5 5,4
 held = 1000h 4,0 5,0
Stress Test MPa ≥15 ≥19
Elongation at break % ≥500
MARKING

The SOTICI PEHD pipes are marked to ensure complete traceability of our products. In addition to the date and time of production and then the production line, we can go back to the raw material which was used to produce the tube in question. The elements that make up this mark:

Mrk-PEHD

For specific projects, this marking may be adapted according to customer demand. Contact us for transmit and study the feasibility of your request.

ALIMENTARITY

The SOTICI PEHD pipes are certified food grade by the Eurofins laboratory tests (France) under the number 14 MAT NY 041. For additional information, consult our following certificate:

 

TECHNICAL DOCUMENTATION AND INSTALLATION REQUIREMENTS TUBES HIGH-DENSITY POLYETHYLENE For the supply of drinking water